On every site where water flows since 1982.
Explore products
Kaplan RunnerKaplan turbine runner
Model TurbineModel turbine · guide vanes
Guide Vane RingGuide vane operating ring
Guide VanesMachined guide vanes
Block Jack HoistBlock jack hoist
Everything from large gates to hydro turbines is manufactured in-house, without outsourcing, at our two plants in Nonsan and Iksan. Holding steel structure, metalwork and equipment installation licenses, we take responsibility for both manufacturing and installation.
We are registered as a qualified maintenance contractor with KHNP and with KOEN, KOMIPO, KOWEPO, KOSPO and EWP. Our proven responsiveness covers everything from planned preventive maintenance to emergency repairs at power plants.
Some 40 industrial property rights, including an invention patent for the screen-integrated multi-pump. We localized small hydropower equipment through technology agreements with turbine manufacturers in Austria, Finland and China.
From K-water and the Korea Rural Community Corporation to local governments and offices of education. The trust built with public clients over 40 years is Kumsung E&C's greatest asset.
Kumsung E&C promotional film
Constant dripping wears away stone —
one drop at a time.
Radial, roller and flap gates, stop logs and small gates
Pit-type Kaplan · Kaplan (spiral case) · Francis · tubular
Rotary, hydraulic, traveling, In-Out and Out-Track types
Gate hoists · small hoists · cranes · conveyors
Drainage station main pumps, submersible pumps, KS small volute pumps and valves
From design to maintenance,
One company takes responsibility from start to finish.
Site condition review and structural analysis. Our in-house design team prepares drawings to the client's specifications.
Steel structures and mechanical equipment are machined and assembled in-house at Nonsan Plant 1 and Iksan Plant 2.
A dedicated installation team carries out on-site installation and commissioning at dams, drainage stations and power plants.
Planned preventive maintenance and emergency repairs. Registered as a qualified maintenance contractor with the five power generation companies.
Building on more than 40 years of accumulated expertise, Kumsung E&C has grown from water infrastructure such as gates and hoists into pumps, power generation and ocean energy equipment, creating a sustainable future.
Organizations and companies we have worked with.
Send us your drawings or site conditions and our staff will review them and reply.
Since 1982,
We have been there wherever water flows.
key… Core technology
Certain… complete product
Future… pursuance of a better future
For over 40 years we have worked with water, grounded in watershed and flood management, building customer trust through reliable products and a commitment to new technology and the future. All of our staff strive to be a company that stands with customers from a single component through the complete process, anytime and anywhere; a company that creates value for customers through the technology we develop; and a company remembered for its good reputation.
All staff of Kumsung E&C Co., Ltd.
567 Maejukheon-ro, Eunjin-myeon, Nonsan-si, Chungnam
TEL 041-741-7301 ~ 4
FAX 041-741-8755
47 Nangsan Nonggongdanji-gil, Nangsan-myeon, Iksan-si, Jeonbuk
TEL 063-862-7301
FAX 063-863-7305
From gates to turbines,
we design and build equipment that handles water.
Since 1982 we have designed, manufactured and installed water resource equipment including gates, trash removers, pumps and hydro turbines.
Company Catalog (PDF) ↓Hydro Turbines
Hoists & Cranes
Pumps & Valves
Energy & Steel
Radial gates, shell-type roller gates, roller gates, sluice gates, FRP automatic gates, movable weirs, stop logs, cylinder gates
Water Control Gates: Radial gates, Shell type roller gates, Roller gates, Sluice gates, FRP Flap gates, Movable weirs, Stop logs, Cylinder gates, OthersHydraulic wire hoists, wire drum type hoists, hydraulic hoists, pin-jack actuators
Hoists: Hydro-rope type hoists, Wire drum type hoists, Hydraulic hoists, Pin jack actuatorsRotary-type In-Out trash removers, Out-Track trash removers, rotary type trash removers, hydraulic type, rack type, lifting type, track type, pump-mounted trash removers, aquatic organism removers
Trash removers: Rotary type IN/OUT automatic trash removers, Out track trash removers, Rotary type trash removers, Hydraulic type trash removers, Rack type, Track type, Aquatic organism removers, OthersKaplan and propeller turbines, Francis turbines, Pelton turbines, small hydropower systems (design & construction)
Hydro turbines: Kaplan turbines, Propeller turbines, Francis turbines, Pelton turbines, Small hydro power plant design & constructionOverhead cranes, gantry cranes, jib cranes, explosion-proof hoists, suspension cranes
Cranes: Overhead cranes, Gantry cranes, Jib cranes, Explosion proof hoists, Suspension cranesMulti pumps, vertical mixed-flow, horizontal mixed-flow, vertical axial-flow, horizontal axial-flow, double-suction volute, submersible motor pumps, KMS vertical pumps, KMS horizontal pumps, KMS gate pumps
Pumps: Multi pumps, Vertical mixed flow pumps, Horizontal mixed flow pumps, Vertical axial flow pumps, Horizontal axial flow pumps, Double suction type pumps, Submersible pumps, Vertical KMS pumps, Horizontal KMS pumps, KMS gate pumpsButterfly valves, sluice valves, check valves, expansion joints, other valves
Valves: Butterfly valves, Sluice valves, Check valves, Expansion joints, OthersBelt conveyors, flight conveyors, chain conveyors, screw conveyors
Conveyors: Belt conveyors, Flight conveyors, Chain conveyors, Screw conveyors, OthersBridges, fences, advertising towers, banner stands
Various steel structure manufacturing: Bridges, Fences, Advertising towers, Banner billboardsPumping and drainage machinery manufacturing & installation, ACTUATOR and HOIST manufacturing & installation, piping (pipe fabrication) works, boiler and sanitary heating/cooling equipment works, plant-related mechanical equipment works
Mechanical equipment manufacturing & installation: Machinery for pumping and draining, Actuator and hoist, Piping and canning, Boiler and hygienic cooling & heating equipments, Mechanical equipment of plantsManufacturing & installation of lock gates and gates; manufacturing & installation of hoists and cranes; steelwork assembly; guardrails, signs, fences and golf course facilities
Metal structure manufacturing & installation: Lock and water control gates, Hoist and cranes, Steel structure, Guard rails, Sign boards, Fences, Golf range facilitiesManufacturing, assembly and installation of steel towers and other steel structures
Steel structure manufacturing & installation: Steel structure, Steel bridges, Steel towers & golf range towers, Steel structures of buildingEnclosed distribution panels, switchboards, MCC panels, distribution panelboards, various electrical works
Electrical work: Distribution boards & panels, MCC panels, Various electrical workMechanical (general industrial machinery) design services
Engineering and design work: Machinery (general industrial machinery) design workManufacturing division, construction division
Overseas construction: Manufacturing & constructionPhotovoltaic, solar thermal, wind, fuel cell, hydrogen, bio, waste, coal, heavy residual oil, hydro, geothermal, ocean energy and 11 other types
Solar photovoltaic power and solar power, Wind power, Fuel cell, Hydrogen, Bio, Waste matter, Coal, Vacuum residue, Hydro power, Geothermy, Ocean energy, etcRadial gates, roller gates, flap gates, stop logs and small gates
Trash remover · In-Out trash remover · Out-Track trash remover · aquatic organism remover
Hoists · cranes · conveyors
Pumps · submersible pumps · valves
Pit-type Kaplan turbine · Kaplan turbine · Francis turbine · Kaplan (spiral case) · tubular turbine · pit-type semi-Kaplan · turbine types we can produce
Photovoltaic systems · Steel structures & other equipment
A gate in which a curved skin plate is supported by radial arms and rotates about a trunnion pin to open and close. Because the water pressure converges at the center of rotation, large openings can be opened and closed with a relatively small hoisting force, even at dam spillways and intakes subject to high water pressure.
We accept inquiries for drawing and specification review, quotations and maintenance.
A vertical-lift gate in which rollers on both sides of the gate leaf travel up and down along guide rails. With its simple structure and easy sealing and maintenance, it is the most widely used type for dam intake and discharge facilities, drainage pumping stations and power plant intakes.
We accept inquiries for drawing and specification review, quotations and maintenance.
A gate that regulates the water level by lowering and raising the gate leaf about a bottom hinge. A hydraulic cylinder precisely controls the angle, retaining water under normal conditions and lowering the leaf fully during floods to secure the flow cross-section. Applied to river intake weirs, movable weirs and emergency gates.
We accept inquiries for drawing and specification review, quotations and maintenance.
A sectional beam-type gate inserted into slots upstream or downstream of the main gate to block water. Used for temporary closure during inspection, repair or replacement of the main gate, it is installed by stacking one section at a time with a crane or dedicated lifting device.
We accept inquiries for drawing and specification review, quotations and maintenance.
Small gates for irrigation canals, drainage channels, wastewater treatment plants and small streams. The type is selected to suit the application, such as sluice gates, circular flap gates and FRP automatic gates, and is driven by a manual or motorized spindle.
We accept inquiries for drawing and specification review, quotations and maintenance.
Equipment that uses a rake to lift and remove debris caught on screens installed in front of intakes or drainage pumping stations. The type (rotary, hydraulic, traveling, etc.) is selected to suit site conditions and debris characteristics, and it is supplied as a system together with a conveying conveyor.
We accept inquiries for drawing and specification review, quotations and maintenance.
The rotary-type In-Out trash remover is a fundamental improvement on the conventional rotary trash remover: the rake emerges from inside the screen and collects debris without being obstructed by it. Because the chain is located inside the screen, it is never damaged by debris or foreign matter. As the rake emerges from inside the screen, friction is far lower. The rake can be made deeper, so it collects a much larger volume of debris. Its fully disassemblable design makes maintenance and repair easy. Unnecessary space is eliminated, giving high stability and economy. Debris is discharged 100%, leaving no residue.
We accept inquiries for drawing and specification review, quotations and maintenance.
The Out-Track trash remover operates with rakes traveling along a track in front of the screen. It can be easily applied to existing facilities, making it economical, and once installed it handles debris much faster than conventional hydraulic trash removers. In particular, the existing screen and transfer conveyor can be used as they are. Even when large quantities of small floating matter or medium-sized debris are washed in, multiple rakes handle them continuously. Also, because the rakes operate outside the screen, the boundary between the inside and outside of the screen is clearly defined, so floating matter can never pass through the screen clearance and enter the inside.
We accept inquiries for drawing and specification review, quotations and maintenance.
The aquatic organism remover is installed at the cooling-water intakes of thermal and nuclear power plants to rapidly remove marine organisms such as swarms of jellyfish and shrimp, which occur in large numbers due to global warming, so that they do not block the intake. To cover a wide area at once, the remover has many horizontal carrier bars that move up and down as a unit, so a vertical travel of 1 m clears approximately 20–25 m simultaneously. Its key feature is the ability to secure a large flow area in a short time, protecting the cooling-water intake function against massive influxes of marine organisms.
We accept inquiries for drawing and specification review, quotations and maintenance.
Hoists that open and close the gates of dams, weirs and drainage stations. Wire-rope drum and hydraulic hoists are used for large gates and spindle-type hoists for small gates. They are designed together with the gate so that lifting capacity and speed match site conditions.
We accept inquiries for drawing and specification review, quotations and maintenance.
We design, manufacture and install cranes for factories, power plants and ports. We supply the type suited to each site, including overhead, gantry and jib cranes, knuckle cranes, fishing-boat lift cranes and monorail hoists, and have installed gantry cranes at small hydropower plants.
We accept inquiries for drawing and specification review, quotations and maintenance.
Conveyors for transporting debris, sludge, aggregate and more. We design and supply belt (horizontal · inclined), chain and screw conveyors together with trash removers and wastewater treatment equipment.
We accept inquiries for drawing and specification review, quotations and maintenance.
We manufacture pumps of every type for drainage stations, pumping stations, water and sewerage systems and plants. We supply mixed-flow and axial-flow pumps (vertical and horizontal), single-stage, multi-stage, double-suction and single-suction volute pumps, as well as self-priming, sludge, metering, sewage, fire-fighting and booster pumps to suit the application, and hold KS certification for small volute pumps.
We accept inquiries for drawing and specification review, quotations and maintenance.
A pump in which the motor and pump are integrated and operate submerged in water. Large submersible motor pumps are used in the suction wells of drainage and pumping stations, while small submersible pumps are used for sewage/drainage, sumps and construction site dewatering. They can be installed without a separate pump house, reducing space and construction costs.
We accept inquiries for drawing and specification review, quotations and maintenance.
Valves for shutting off and regulating flow in pipelines and pumping stations. We manufacture gate, butterfly, check (non-return), flap and sluice valves and expansion joints, and supply them as a system together with pump and gate equipment.
We accept inquiries for drawing and specification review, quotations and maintenance.
A Kaplan turbine for low-head, high-flow applications, with the generator housed in a pit and directly coupled to the turbine. We supplied 16 units totaling 17,165kW to six Four Major Rivers weir small hydropower plants (Sejong Weir, Gongju Weir, Baekje Weir, Gangcheon Weir, Gumi Weir and Juksan Weir).
We accept inquiries for drawing and specification review, quotations and maintenance.
An axial-flow turbine that maintains high efficiency under varying flow by adjusting the angle of its movable runner blades. Suited to small hydropower plants with heads of 2~30m, it has been supplied to a wide range of small hydro sites including agricultural reservoirs, water treatment plants and power plant discharge channels.
We accept inquiries for drawing and specification review, quotations and maintenance.
A reaction turbine in which water flows from the outside of the runner inward, transferring energy. It is the most widely used type for medium-head, medium-flow small hydropower. We machine the runners in-house and have carried out a 50MW-class Francis runner technology development project and a small hydropower Francis turbine demonstration project.
We accept inquiries for drawing and specification review, quotations and maintenance.
A vertical Kaplan turbine in which a spiral casing surrounds the runner to supply water evenly. Semi-Kaplan and full Kaplan blades are manufactured in-house, and the runner, casing and components are all machined at our plant.
We accept inquiries for drawing and specification review, quotations and maintenance.
A low-head turbine with the turbine and generator arranged in line inside the pipeline. With low flow losses and a small footprint, it is suited to micro and small hydro sites such as wastewater treatment plant discharge, water treatment plants and small weirs.
We accept inquiries for drawing and specification review, quotations and maintenance.
A pit-type turbine using a fixed-blade (semi-Kaplan) runner, simpler in structure and more economical than a Kaplan turbine. Generation efficiency has been improved through research on reducing turbulence in low-head semi-Kaplan units.
We accept inquiries for drawing and specification review, quotations and maintenance.
In addition to the types above, we can manufacture propeller · Pelton · cross-flow · GT conduit-type Kaplan · vertical-axis propeller turbines. We operate a model turbine test facility to IEC-60193, and manufactured and installed the K-water hydropower equipment performance test center.
We accept inquiries for drawing and specification review, quotations and maintenance.
We design and build rooftop, ground-mounted and floating photovoltaic (PV) systems. We have experience designing structure tilt angles matched to the local solar altitude and designing floating structures, and have also installed thermal systems such as solar hot-water systems for welfare facilities.
We accept inquiries for drawing and specification review, quotations and maintenance.
Mechanical equipment for sewage and wastewater treatment plants. We manufacture and install debris processors, sludge collectors, scum removers, UV disinfection units, chemical feeders, drum screens and more.
We manufacture and erect steel structures of all kinds, including bridges, pedestrian overpasses and factory buildings. Licensed for structural steel work and metal structure/window work, we handle everything from design through manufacturing to site installation.
We supply the switchboards and carry out the electrical works required for the electrical control of pumping station and gate equipment. We manufacture enclosed distribution panels, motor control centers (MCC), distribution panelboards and residential distribution panelboards, and handle installation under our electrical contractor license.
We accept inquiries for drawing and specification review, quotations and maintenance.
At dams, weirs and pumping stations at home and abroad,
and at hydropower and ocean energy construction sites,
Kumsung E&C's technology is proven every day
as we build our global competitiveness.
We design, manufacture and install small hydropower, tidal current and photovoltaic power generation equipment. We supplied 16 Kaplan turbines (17,165 kW) to six small hydropower plants at the Four Major Rivers weirs, and carry out small hydropower projects for K-water and the five power generation companies, including Soyanggang Dam, Chungju No. 3 Hydro and Andong Weir.
+About Energy Business
We manufacture and install gates and hoists for dams, weirs and drainage stations. Our work covers equipment at major Korean dams and weirs, including the Seomjingang Dam radial gates, Paldang Dam stop logs, Goesan Dam gate equipment, and the Juksan Weir and Daegwang District movable weirs.
+About Water Infrastructure
We manufacture and install trash removers, cranes, pumping station equipment and wastewater treatment machinery. Our track record in plant machinery includes exports of In-Out automatic trash removers (Malaysia) and hydraulic trash removers (Indonesia), as well as gantry cranes for small hydropower plants.
+About Metalwork & Plant
We conduct hydro turbine R&D, design review and national research projects. We have participated in KETEP and KAIA projects including 50MW Francis runner technology development, medium-scale hydropower plant construction technology development, and low-head semi-Kaplan efficiency improvement research.
+About Engineering
Korea Hydro & Nuclear Power (KHNP)K-waterKorea Rural Community CorporationKOMIPOKOWEPOKOENEWPKOSPODoosan Heavy IndustriesPublic Procurement ServiceLocal governments including Nonsan City, Buyeo County and Hongseong County
We design, manufacture and install small hydropower, tidal current and photovoltaic power generation equipment. We supplied 16 Kaplan turbines (17,165 kW) to six small hydropower plants at the Four Major Rivers weirs, and carry out small hydropower projects for K-water and the five power generation companies, including Soyanggang Dam, Chungju No. 3 Hydro and Andong Weir.
| Weir | Rivers | Hydro turbines | Installed capacity |
|---|---|---|---|
| Sejong Weir | Geum River | Pit-type Kaplan 3 units × 770kW | 2,310 kW |
| Gongju Weir | Geum River | Pit-type Kaplan 2 units × 1,500kW | 3,000 kW |
| Baekje Weir | Geum River | Pit-type Kaplan 4 units × 660kW | 2,640 kW |
| Gangcheon Weir | Han River | Pit-type Kaplan 3 units × 1,665kW | 4,995 kW |
| Gumi Weir | Nakdong River | Pit-type Kaplan 2 units × 1,500kW | 3,000 kW |
| Juksan Weir | Yeongsan River | Pit-type Kaplan 2 units × 610kW | 1,220 kW |
| Total · 16 units | 17,165 kW | ||
We manufacture and install gates and hoists for dams, weirs and drainage stations. Our work covers equipment at major Korean dams and weirs, including the Seomjingang Dam radial gates, Paldang Dam stop logs, Goesan Dam gate equipment, and the Juksan Weir and Daegwang District movable weirs.
We manufacture and install trash removers, cranes, pumping station equipment and wastewater treatment machinery. Our track record in plant machinery includes exports of In-Out automatic trash removers (Malaysia) and hydraulic trash removers (Indonesia), as well as gantry cranes for small hydropower plants.
We conduct hydro turbine R&D, design review and national research projects. We have participated in KETEP and KAIA projects including 50MW Francis runner technology development, medium-scale hydropower plant construction technology development, and low-head semi-Kaplan efficiency improvement research.
Creating the future with safe, innovative technology,
pursuing eco-friendly, people-friendly convenience,
and opening a sustainable tomorrow with trusted technology.
Always looking ahead, Kumsung E&C keeps making its mark, and our passion for technology development is always directed toward our customers.
Model turbine fabrication and testing (runner · guide vanes)
Transparent draft tube model test section
Hydraulic test facility tank
Building on accumulated know-how, Kumsung E&C constantly strives to create new and practical technology. Through these efforts we pursue innovation in water infrastructure, including the human-friendly BLOCK JACK HOIST, improved trash removal equipment (AUTO SCREEN), the multifunctional MULTI PUMP and the HYDRO-ROPE TYPE HOIST for dams and roller gates,
Gate-mounted low-head turbine (Paju CHP · NET certified)
Low-head screw water-flow turbine
Weir small hydro plant (gates · turbine)
and we have achieved remarkable results in energy, including the cost-effective GATE TURBINE, the innovative integrated PIVOT TURBINE and the TIDAL TURBINE.
Technology development PDFs: View test facility materials ↗
Some 40 patents and utility models. We hold core water-resources equipment technologies including the invention patent for the screen-integrated K.M.S multi-pump (2007), the In-Out automatic trash remover and the hydraulic rope-type lifting device.
Product catalogs, company profiles and videos,
all in one place.
※ Please contact us directly for design data.
Send us your drawings or site conditions and
Our staff will review it and reply.
Kumsung E&C gave a company presentation to Islom Abdurakhmonov, Chairman of the Board of Uzbekhydroenergo JSC (Uzbekistan), and his delegation at our head office, and the two sides discussed cooperation in small hydropower.
The presentation covered our main business areas, production capacity, technical capabilities and product catalogue, and set out in detail our proposals for developing small and micro hydropower.
The discussion focused on adapting Korean small and micro hydropower technology to local conditions in Uzbekistan and making efficient use of the energy potential of existing irrigation networks and hydraulic structures. The two sides also discussed local production of turbine-generator units, technology localisation and future joint projects.
With the design institute Gidroproyekt JSC, the UzHydroPower plant, and faculty from the TIIAME National Research University and Tashkent State Technical University (TDTU) in the delegation, these topics could be examined from production, engineering and academic perspectives. This laid the groundwork for matching our technology to the needs of Uzbekistan's hydropower sector, assessing its practical benefits, and defining the direction of future cooperation.
The two sides agreed to jointly develop a roadmap for micro hydropower development in Uzbekistan within the framework of cooperation between Uzbekhydroenergo and Kumsung E&C, and also discussed taking the cooperation to the next level and accelerating promising projects.
Building on this agreement, Kumsung E&C will take its cooperation with Uzbekistan forward step by step.
A delegation led by Islom Abdurakhmonov, Chairman of the Board of Uzbekhydroenergo JSC (Uzbekistan), visited the Kumsung E&C factory from 14 to 16 September 2026 as part of its official trip to Korea.
According to Uzbekhydroenergo, Uzbekistan has increased its number of hydropower plants from 36 to 106 over the past decade, bringing total hydropower capacity to 2.5 GW, and is studying international experience to expand small and micro hydropower and introduce advanced technologies. This visit was part of that effort.
At the factory, the delegation took a close look at how turbine-generator units and hydropower equipment are designed, manufactured and tested. They reviewed our technical solutions for small and micro hydro turbines that make efficient use of low-head flows, and noted that our practice of testing equipment during manufacturing to verify technical parameters and efficiency is of practical value for producing and improving hydropower equipment in Uzbekistan.
The delegation then visited the nearby Baekje Weir small hydropower plant on the Geum River to see its operation and installed equipment. Commissioned in 2011, the plant operates four units with a total capacity of 2.64 MW; Kumsung E&C supplied its turbine-generator equipment under the Four Major Rivers Restoration Project.
Since its founding in 1982, Kumsung E&C has designed and manufactured energy equipment including small and micro hydropower units, as well as gates for water supply and irrigation, steel structures, automatic gates, water and wastewater equipment, pumping station equipment, automatic trash rack cleaners and cranes.
Kumsung E&C took part in the Korea International Water Week 2026 exhibition, held at EXCO in Daegu from 9 to 11 September, presenting its small hydro turbine and gate technologies.
Organised by the Korea Water Forum, Korea International Water Week brings together governments, public institutions and water industry professionals from Korea and abroad to discuss water policy, technology and cooperation. We set up our booth in the Water-Energy Nexus Zone, which gathers companies working across water and energy.
At the centre of the booth stood a high-precision bulb-type model turbine built for a 7 MW-class bulb turbine. Used for performance testing, the model reproduces the real runner blades, guide vanes and instrumentation, giving visitors a close look at how a turbine is built inside.
We also showed a block jack hoist for operating gates, a Kaplan turbine power generation model, and turbine runners and components, with panels on key projects such as the Seomjin River Dam and Yeongsan River, our turbine and trash rack cleaner ranges, and our research work. Our staff explained the equipment and its applications directly to visitors.
Kumsung E&C will continue to present its hydropower equipment technology and expand opportunities for cooperation through exhibitions and exchanges at home and abroad.
Send us your drawings or site conditions and
Our staff will review it and reply.
Privacy Policy
Based on Article 30 of the Personal Information Protection Act / Article 31 of the Enforcement Decree of the Personal Information Protection Act
Kumsung E&C Co., Ltd. manages your personal information securely in accordance with the Personal Information Protection Act. Through this Privacy Policy, you can review the purposes and methods of processing the personal information you provide, as well as the measures taken to protect it.
The personal information processed is not used for any purpose other than those set out below, and prior consent will be obtained if the purpose of use changes.
Personal information is retained for the retention period set out below and is destroyed without delay thereafter.
Data subjects or their legal representatives may exercise their rights with respect to personal information, including the right to access, correct, delete or suspend the processing of personal information, by telephone, in writing or by other means. However, matters that would have a material effect on the Company's business while the data subject is employed by the Company are excepted, and such rights are limited to cases in which it is clearly necessary for the interests of the data subject's life, body or property.
Collected personal information is not provided to third parties except where there is a legal basis or where consent has been obtained.
| Role | Name | Position | Department | Contact |
|---|---|---|---|---|
| Protection Officer | Park Ik-gu | General Manager | Management Support Division | 041-741-7301 |
| Person in charge | Kim Mi-suk | Manager | Management Support Division | 041-741-7301 |
All information you have provided is securely protected by the following measures.
This Privacy Policy was established on April 1, 2012. In the event of any addition, deletion or amendment of its contents due to changes in laws, policies or security technology, the reasons for and details of the change will be announced on the Company's website or at its place of business at least 7 days before the revised Privacy Policy takes effect.
Date of announcement : April 1, 2012 / Effective date : April 1, 2012
Video Surveillance Equipment (CCTV) Operation and Management Policy
Based on Article 25, Paragraph 1 of the Personal Information Protection Act
Kumsung E&C Co., Ltd. (hereinafter the "Company") hereby informs you, through this Video Surveillance Equipment Operation and Management Policy, of the purposes for which and the manner in which the video information collected and processed by the Company is used and managed.
The Company installs and operates video surveillance equipment (CCTV) for the following purposes in accordance with Article 25, Paragraph 1 of the Personal Information Protection Act.
| Number of units installed | Installation location and recording range |
|---|---|
| 5 indoor units | Offices on the 1st and 2nd floors and the interior of the factory |
| 3 outdoor units | In front of the office building and the factory building |
In order to protect video information and handle complaints relating to personal video information, the Company has designated a Personal Video Information Protection Officer as set out below.
| Role | Name | Position | Department | Contact |
|---|---|---|---|---|
| Protection Officer | Koo Bon-cheol | CEO | - | 041-741-7301 |
| Person in charge | Koo Seul | Deputy General Manager | Quality Assurance Dept. | 041-741-7301 |
Processing method : Requests concerning the use of personal video information for purposes other than the original purpose, provision to third parties, destruction and access are recorded and managed, and the information is permanently deleted by a method that renders it unrecoverable (printed materials are shredded).
| Recording hours | Retention period | Storage location |
|---|---|---|
| 24 hours | 30 days from the date of recording | CEO's office |
You may at any time request the operator of the video surveillance equipment to allow access to, confirm the existence of, or delete your personal video information. However, such requests are limited to cases in which the personal video information in which you appear is clearly necessary for the urgent interests of the data subject's life, body or property.
The video information processed by the Company is managed securely through measures such as encryption. In addition, as administrative measures for the protection of personal video information, the Company controls access rights to personal information and, to prevent forgery or alteration of personal video information, records and manages the date and time of creation of personal video information as well as the purpose of access, the person accessing it and the date and time of access. Furthermore, locking devices have been installed to ensure the secure physical storage of personal video information.
This Video Surveillance Equipment Operation and Management Policy was established on April 1, 2012. In the event of any addition, deletion or amendment of its contents due to changes in laws, policies or security technology, the reasons for and details of the change will be announced on the Company's website at least 7 days before it takes effect.
Date of announcement : April 1, 2012 / Effective date : April 1, 2012
